TQ-C300 300 ml Round PP Food Container with Lid

A 300 ml round container in polypropylene (PP): Ø116 mm across the rim, Ø96 mm across the base, supplied as base-and-lid sets, 600 sets per box. Dimensional tolerance ±0.3 cm on hand measurement. Overall height is not stated on the drawing and should be measured before publication.

 

 

The 20 mm step between rim and base gives the taper that lets empty containers nest and filled ones stack without wedging. Base and lid are the same polymer, so both travel in one recycling stream — the property packaging rules now grade on, and one worth printing on the carton rather than leaving to inference.

 

 

300 ml is 10.1 US fl oz, marginally more than a 10 oz measure at 295.7 ml; where a specification calls for exactly 10 oz, verify the fill volume rather than treating the two as interchangeable. Not leak-proof, not for retort, oven or open flame. For EU buyers, note the channel: from 1 January 2030 single-use plastic packaging for condiments and sauces in the HORECA sector is restricted under the Packaging and Packaging Waste Regulation, while retail, food processing, bakery, meal-kit and cold chain are unaffected.

 

 

Rim and base diameters, sets per box and tolerance are as drawn. Overall height is not on the drawing, so it is not on this page; add it only once measured with a calliper. The material is polypropylene for both components — a statement of fact, not a compliance claim.